Removing the glue from the 4x4 emblem.

[CaptJoe777]

Got the 4x4 emblem off and I have tried everything from goo gone to tar and bug remover but there is still a glue outline. Need some help on this one.

 

[Irongoats]

3M wheel

 

[Eighty]

Gasoline and sandpaper

 

[Dustin]

Gasoline and sandpaper

Gotta be a 40 grit right?

 

[Eighty]

Seriously, though, I usually find a VERY sticky tape (like Gorilla tape). Tear off a piece, and use it to "pick up" the remnants off the paint. Sometimes it takes a little sideways pulling/smearing action to get the residue to lift off. May take a few (or several) pieces of new tape before it's all done. But it generally results in a perfectly clean surface.

 

[Lsujker]

Depending how much, 3M vinyl removal wheel as mentioned above works great. Clean with some water displacement 40.

 

[ٍSiglo]

I've tried many products but I always go back to this one:

I've been using it for years on all my vehicles.

 

[Scottie2Hottie]

Literally used a finger and rubbed it. It balled up and fell off the paint. No heat. No harsh chemicals. Just be aware if you use heat, wheel or chemical, too much at one time will damage the thin clear coat.

 

[BLKRHO2169]

Got the 4x4 emblem off and I have tried everything from goo gone to tar and bug remover but there is still a glue outline. Need some help on this one.

Alcohol and water mixture... Spray. Let soak in for a minute and rub off.

 

[cconnorhtx]

3M wheel

 

[cconnorhtx]

3M wheel

This is the correct answer