yellow explody warning (how my wife described it) | anyone else?

toast411

Member
Joined
May 21, 2025
Messages
36
Reaction score
35
Current Ride
RHO
Anyone else getting this warning message? If so what was the fix?
1749821607030.webp

I'm thinking it's 'Forward Collision Warning' FCW, but the message is different than what I see in the owner's manual.

1749821815880.webp


This 'explody' message just appears, stays a while they goes away after a start or two. Other than the message on the dash I can't notice anything else different with the truck. Does anyone know if there is a way to toggle 'Forward Collision Warning' FCW on and off? I can't seem to find anything.

It is also experiencing a random 'Warning illumination.....' message; but they don't necessarily occur at the same time.

Truck has its 4th trip to the dealer next Wednesday; I just crossed 500 miles.
On the plus side, my last Ram product was an ecoDiesel, so I'm already on a first name basis with service writers. The RHO doesn't seem to need to spend the night at the dealer vs the ecoDiesel which really didn't like to sleep at home. :)
 
Got that the other day. Hooked up to scanner no faults/codes a gremlin apparently will start truck today after a couple of days to see if it goes out.
 
Had both of the lights go off on me this past Saturday. I cleaned the sensors and that seems to have cleared out one of the warning lights, but the other is still there.
 
+1 on cleaning the sensors and also do the windshield up behind the mirror.
 
Got it after a rain and dirt day. Quick hose clean and it hasn’t come back.
 
Also...if you disable AEB (automatic emergency braking) which YOU SHOULD IMMEDIATELY BECAUSE IT'S DANGEROUS AS FUCK, it will always stay illuminated. Lol that was intense.
 
Also...if you disable AEB (automatic emergency braking) which YOU SHOULD IMMEDIATELY BECAUSE IT'S DANGEROUS AS FUCK, it will always stay illuminated. Lol that was intense.
I’ve had AEB disabled from day 1 and mine has never show. That light.
 
Did you also disable forward collision function, I did...and that stupid pedestrian warning.
 
Yeah turn that shit off, especially dangerous at night if it catches something that is not there because it has a harder time seeing in the dark.
 
Did you also disable forward collision function, I did...and that stupid pedestrian warning.
I don’t remember. I think so, sounds like something I would do but if I remember I’ll check after I get off work
 
your truck entered Michael Bay mode! (and yes it's the pedestrian warning off)
 
update

took the truck for a couple hundred-mile drive, more lights and messages
a new yellow warning
1750081724429.webp


and these warnings
1750081756218.webp

1750081770418.webp

1750081784547.webp


it isn't a dirty sensor issue as the truck is clean, and it isn't raining
once in a while, after a restart the messages will be gone, but then return

appointment on Wednesday the 18th, see what the dealer can do
 
update from dealer visit
went to dealer, they pulled codes, no active only stored (no lights were on the dash during the visit)



DTCDescription
B2204-00ECU Configuration Mismatch
U0092-00Ethernet Bus 3
U1060-83High Speed FD-CAN4 Communication Bus - Valve of Signal Protection Calculation Incorrect
B1287-92Instrument Panel Cluster Display - Performance or Incorrect Operation
B15A1-00Media Port 1 Connection
U015C-00Lost Communication With Automated Driving System Control Module “B”
C2227-00ABS Disabled ECU
C008E-00ECU Internal Performance
U0401-00Lost Communication With Body Control Module “A”
U015C-00Lost Communication With Automated Driving System Control Module “A”

Without an active code they can't debug what is actually causing the issue; they documented the problem and I'm going to drive it until something lights up and bring it back with an active code.

I personally like this approach better than using a parts cannon, bummer they don't have a code logger they could just plug in vs having to drive back.
 

Latest Discussions...

Trending content

Back
Top