Don’t recommend SynapZe DT

Mattroge

New member
Joined
Sep 15, 2026
Messages
10
Reaction score
4
Current Ride
2026 ram rho
Was already on the fence about buying the product due to the way the social media guy acts. Ended up buying it and had it installed for a day and already have a check engine light. Not sure what the issue is but I’m uninstalling and returning it. Customer service was also 0 help!
 
Hmm that's weird. Yeah I agree about the guy who does the videos but I've had mine installed 2 weeks and no issues. Im on update v5 btw
 
I posted this in my build thread. I got a CEL one day. Checked codes - said CAN bus communication issue. Cleared the codes. Then two days later my truck went into limp mode on the highway. I pulled off, restarted and it was okay. Cleared codes. I then drove halfway and it went into limp mode. I pulled over to a road nearby my Jeep shop. It stayed in drive! And I could NOT SHUT THE ENGINE OFF. I tried everything to shut the engine off. Then even pulled the negative battery terminal, engine still running. Had to pull the fuel fuse. After I restarted happened again while just sitting there. So Ipulled the synapze and it's been fine ever since.

I cannot recommend this and they really need to fix it or refund me. Was super dangerous. In all my years owning many many vehicles, this hasn't ever happened to me.

I've emailed them with all the codes.. no reply.
 
I posted this in my build thread. I got a CEL one day. Checked codes - said CAN bus communication issue. Cleared the codes. Then two days later my truck went into limp mode on the highway. I pulled off, restarted and it was okay. Cleared codes. I then drove halfway and it went into limp mode. I pulled over to a road nearby my Jeep shop. It stayed in drive! And I could NOT SHUT THE ENGINE OFF. I tried everything to shut the engine off. Then even pulled the negative battery terminal, engine still running. Had to pull the fuel fuse. After I restarted happened again while just sitting there. So Ipulled the synapze and it's been fine ever since.

I cannot recommend this and they really need to fix it or refund me. Was super dangerous. In all my years owning many many vehicles, this hasn't ever happened to me.

I've emailed them with all the codes.. no reply.
What a joke
 
I posted this in my build thread. I got a CEL one day. Checked codes - said CAN bus communication issue. Cleared the codes. Then two days later my truck went into limp mode on the highway. I pulled off, restarted and it was okay. Cleared codes. I then drove halfway and it went into limp mode. I pulled over to a road nearby my Jeep shop. It stayed in drive! And I could NOT SHUT THE ENGINE OFF. I tried everything to shut the engine off. Then even pulled the negative battery terminal, engine still running. Had to pull the fuel fuse. After I restarted happened again while just sitting there. So Ipulled the synapze and it's been fine ever since.

I cannot recommend this and they really need to fix it or refund me. Was super dangerous. In all my years owning many many vehicles, this hasn't ever happened to me.

I've emailed them with all the codes.. no reply.
I was about to pulll the trigger on one, but after hearing multiple reports like yours I’m backing off. The main thing is Z Automotive ghosting customers. That’s inexcusable.
 
Mine has been issue free since I installed it over a month ago. I'll update to v.06 today
 
Last edited:
I was about to pulll the trigger on one, but after hearing multiple reports like yours I’m backing off. The main thing is Z Automotive ghosting customers. That’s inexcusable.

Yeah I sent the email last Wednesday. Detailed all the codes each time (I took pictures of every code). Nothing yet.
 
Product issues are one thing- not supporting customers who bought said product and are having issues? Unacceptable.

Almost as if they think if they pretend there aren’t any issues, then there aren’t any issues..🤷🏻‍♂️

I’ll pass. Or at least wait.
 
Was already on the fence about buying the product due to the way the social media guy acts. Ended up buying it and had it installed for a day and already have a check engine light. Not sure what the issue is but I’m uninstalling and returning it. Customer service was also 0 help!
Yeah, the one guy on their social media page is a straight tool bag. Always has a wise ass answer when you ask a question in the comments. I wont buy their stuff anymore just cause of him. Just a dousche bag. Also these newer trucks are more complicated and have issues as is let alone adding an aftermarket device. Not doing it for amber lights I dont see when im driving and auto start/stop where I just hit my button. Good luck.
 
Issue a chargeback on your credit card. They'll respond

Yeah, the one guy on their social media page is a straight tool bag. Always has a wise ass answer when you ask a question in the comments. I wont buy their stuff anymore just cause of him. Just a dousche bag. Also these newer trucks are more complicated and have issues as is let alone adding an aftermarket device. Not doing it for amber lights I dont see when im driving and auto start/stop where I just hit my button. Good luck.
Hit the hammer on the nail, big mistake buying this shitty product let alone shitty customer support and social media guy can kiss my ass
 
I have one with zero CELs. Did you make sure all the connectors are fully seated?
 
I have one with zero CELs. Did you make sure all the connectors are fully seated?
Yes. I do all electrical stuff on my project vehicles myself and made sure. But just be extra sure I had my shop buddy check when I had my first cel.
 
I’m curious what SW version you guys were on.

I am pretty sure Synapze was the cause of my dead battery. Installed the Synapze I think on v3, next morning my AUX battery was dead.

I’ve since updated to v5, and had my truck in to the shop for some other issues, but since getting the truck back I’ve had some really weird and random communications and starting issues. 3x my truck struggled to start, and I’ve had half a dozen times where I started and had some warning lights.

Unfortunately, warning lights have been common for me even without the Synapze so I can’t say for sure, but the starting issues are new, and some of these warnings are new to my truck.

It was definitely unstable on initial launch and killed a bunch of batteries. Agreed their media guy is a tool, but also really pisses me off that they’re ghosting or even making fun of customers who have legitimate issues.
 
I’m curious what SW version you guys were on.

I am pretty sure Synapze was the cause of my dead battery. Installed the Synapze I think on v3, next morning my AUX battery was dead.

I’ve since updated to v5, and had my truck in to the shop for some other issues, but since getting the truck back I’ve had some really weird and random communications and starting issues. 3x my truck struggled to start, and I’ve had half a dozen times where I started and had some warning lights.

Unfortunately, warning lights have been common for me even without the Synapze so I can’t say for sure, but the starting issues are new, and some of these warnings are new to my truck.

It was definitely unstable on initial launch and killed a bunch of batteries. Agreed their media guy is a tool, but also really pisses me off that they’re ghosting or even making fun of customers who have legitimate issues.
I have been on v4 since I installed it (did not upgrade to v5 I think a lot due to what you were experiencing, Señor Taco) and it has been flawless.

I definitely want to take advantage of the 3 honk delete but I will wait to upgrade to v6 after some time

Again, v4 has been flawless for me
 
Was already on the fence about buying the product due to the way the social media guy acts. Ended up buying it and had it installed for a day and already have a check engine light. Not sure what the issue is but I’m uninstalling and returning it. Customer service was also 0 help!
they need to ditch that social media guy...
 
We all need to stop purchasing their product to make a dent on their profits to actually have some kind of answer. Unless some other company put some effort into making better products we are stuck with Z automotive, but for sure this media guy is part of the Owner's family... cause there's absolutely no way...
 
great...I just got mine in the mail today. maybe I'll hold off on installing and hope it doesn't turn into a $300 paper weight...
 
great...I just got mine in the mail today. maybe I'll hold off on installing and hope it doesn't turn into a $300 paper weight...
I've had mine on 2 weeks and no issues, updated to version 5 when I got it. Like most things, some people will have issues, some won't. You don't hear from the guys who aren't having issues as much as you do from those who have issues. You spent the 300 already, if it doesn't work to your liking just unplug it. Enjoy!
 
TaZer DT for RHO What did you do to your RHO Today? What did you do to your RHO Today? Not sure I fit in here No Factory AUX Switches? Here's a Simple Alternative What did you do to your RHO Today?
TaZer DT for RHO What did you do to your RHO Today? What did you do to your RHO Today? Not sure I fit in here

Trending content

Back
Top