R.A.D. Downpipe sound clips

I just need to find a shop that can install them. Once I decide on that, then I can seriously consider ordering them
 
Bit of a dummy here and seeking some info. I'm getting closer to pulling the trigger on some downpipes and want to make sure I have all necessary components on hand. I know for catback installs they have you reuse the gasket/clamp where the catback meets the exhaust. I'll most likely go ahead and replace those. What about gaskets up at the top end where they attach to the turbos, are there any necessary gaskets needed there? Also any other supplies I should add to the check list for the install?

Thank you
 
Bit of a dummy here and seeking some info. I'm getting closer to pulling the trigger on some downpipes and want to make sure I have all necessary components on hand. I know for catback installs they have you reuse the gasket/clamp where the catback meets the exhaust. I'll most likely go ahead and replace those. What about gaskets up at the top end where they attach to the turbos, are there any necessary gaskets needed there? Also any other supplies I should add to the check list for the install?

Thank you

The connection where the downpipes and midpipes meet have a copper gasket, which are "crimped" on to the mid-pipes side. They can be remove and replaced of you'd like to. I never replaced my set, and I dont think anyone else did. As for the gaskets on the turbo, that depends on how many miles you have on them and how hard you drive it. I never replaced the set on my truck, but honestly I probably should with as many time I have dropped the pipes. I'll probably replace them next go around.
20251212_235438.webp
 
Pipes ordered, can't wait to get my hands on them. I'll be running afe track series intake, rad downpipes, awe 0fg catback. I'll wait for November December before I pull the trigger on a tuner. If Mopar hasn't come out with one, I'll be buying a cat6
 
Here are the photos of V2.

Are they pretty compared to others? That’s subjective. BUT I will say this, I now have 25k miles on them, multiple track events (as seen in the photos), with constant exposure to high loads, bouncing off the redline, and keeping the engine spinning above 4k RPM for extended periods. And no issues.

Sure, I could simulate these conditions, but a simulation is still a simulation. Real-world testing will always tell you more.

Why do I take that approach? When I was in the Navy, we would train by simulating different conditions and scenarios. But when those situations actually happened in the real world, you quickly learned that a simulation can only prepare you for so much. Yes, simulations have their place, but you can't base everything off of them. At some point, you have to put it to the test in the real world and see how it actually performs.

I'll have some "off-road" versions soon. I'll be testing them on a track to make sure the ECM doesn't go crazy. I be running a set of mini-cat O2 spacers and they'll be ceramic coated inside and out.
 

Attachments

  • file_00000000b2d48230b227b926869e385e.webp
    file_00000000b2d48230b227b926869e385e.webp
    59.5 KB · Views: 33
Nice excited to see the results of the off-road version.
 
DAMN! So stoked on these. Real world testing 100%. It makes me think of the Apple iPhone charging port test. They unplugged and plugged in the new lightening cable years ago over 10,000 times without any issue, but what people don’t realize is that the machine is keeping the cable at the perfect position every time. Real world that’s not the case, crooked angles, debris, pocket lint… ports needed replaced or cleaned and charging cables needed replaced. All for simulation to point out any engineering oversight, but real world testing is where you find the actual problems.

Great work @Dcchris311
 
Love it Chris!!!

Chris
 
If so, catless should be quite a bit cheaper too id imagine 🤞
 
@Dcchris311 I’m going to assume you’re the guy to talk to about the RHO downpipes. How can we get in touch?
 
@Dcchris311 I’m going to assume you’re the guy to talk to about the RHO downpipes. How can we get in touch?
Here's his site, if that's what you mean.
Link is to the pipes

 
Is your RHO one of a kind?  Let's find out. Leveling kit What did you do to your RHO Today? Forged Blue Metallic Photoshoot! 2025+ RAM 1500 RHO / Rebel 23in Light Bar - PRO Digital Dash Differences
Is your RHO one of a kind?  Let's find out. Leveling kit What did you do to your RHO Today? Forged Blue Metallic Photoshoot!

Trending content

Back
Top