What did you do to your RHO Today?

[Santino]

You’ve changed it twice?

No...I had a '25 fbm...Now I have a '26 MR

 

[brianwilkey]

Yep 82216598AC is the way to go. I’m surprised Ram hasn’t figured that out yet. Mine went in easy no problems, perfect fit.

P.S. Has anyone done the software update? I’m afraid to because I don’t have any issues!

I installed the update today. I pulled up to a meeting and figured I’d let it install while it was parked. YOLO. I was sweating bullets wondering what was going to happen if the update failed. But, came back to the truck a few hours later to a successful update, and it had zero issues on the drive home.

 

[jaxadam]

I installed the update today. I pulled up to a meeting and figured I’d let it install while it was parked. YOLO. I was sweating bullets wondering what was going to happen if the update failed. But, came back to the truck a few hours later to a successful update, and it had zero issues on the drive home.

I just started it a few minutes ago and it said 26 minutes and when I opened the door everything went black! We'll see here in a few!

 

[RamFan]

No...I had a '25 fbm...Now I have a '26 MR

Hes one of them wealthy types that can afford a RHO but not a TRX

Chris

 

[Santino]

Hes one of them wealthy types that can afford a RHO but not a TRX

Chris

Lol...I can easily afford a Trx...Honestly had no idea about Mark Dodge until '25...The dealers in the Chicago/Milwaukee area had the Trx marked up so high...By the time Ram starts spitting out enough TRXs for MD to give discounts I might be in the market...If I could fit my Boerboel in the new RS5!?

 

[warren3537]

I have done phase 1 of many phases; I got a set of Vision 353 Turbine (18x9 et.18) in matte black and had them clear coated gloss, not only for keeping the nicks and what not down to a minimum but also sort of match the black lower portion, I also wrapped them in Falken Wildpeak AT/3W's, tire rack had a clearance on them, made in 22 but new tires, I also did the 10mm spacers which now gives them a +8 which I was looking at a 0 offset but close enough for me.

 

[zgreenmt]

A little work this afternoon on the new RHO. Put on the RB20 side steps yesterday. Today was RC hard rollup tonneau cover, Husky comfort bed mat, molle panels, and some magnetic work lights I picked up on my Costco trip.


View attachment 34032


View attachment 34033

View attachment 34034

Nice rig! How are you liking the hard roll up so far? Is it the Rough Country one?

 

[zgreenmt]

Installed Rough Country Hard Roll Up Cover. It’s pretty nice. I struggled for a while to get it lined up as best as possible. 30 mins to get it on, another 1.5 hours fiddling with adjustments. Still going to try something to get the tailgate seal tighter but for the $850 it seems like a pretty good deal. Haven’t had a tonneau cover before so I can’t compare to the others out there. It’s pretty heavy, the box was 94lbs. Powder coated aluminum slats.

Hey there. How is your RC Hard Roll Up holding up after a year? Are you still liking it? I've been thinking about getting one. Thanks in advance!

 

[Thekingofkings]

Ordered the step as everyone has been ordering them and the number was down to 3 available. A notch out and some black krylon is way better then the Mopar step price.

Guess I will go see if this update is coming on mine or not this evening.

 

[kolky]

Nice rig! How are you liking the hard roll up so far? Is it the Rough Country one?

Loving it so far. It looks great and I did not see any leaks after pressure washing the truck. It's a ton easier to open up than my Bakflip MX4 I had on my last truck and that one leaked quite a bit. Only thing I think I may miss at some point vs the tri-fold is the ability to leave it paritally open.

 

[RADA]

Deep Cleaning Morning

 

[zgreenmt]

Loving it so far. It looks great and I did not see any leaks after pressure washing the truck. It's a ton easier to open up than my Bakflip MX4 I had on my last truck and that one leaked quite a bit. Only thing I think I may miss at some point vs the tri-fold is the ability to leave it paritally open.

Thanks for the additional info. Appreciate it.

 

[Aldo512]

What did I do with my RHO today? Read through all the recall notifications

 

[lapoolboy]

What did I do with my RHO today? Read through all the recall notifications

Welcome to the post-COVID world!

 

[Aldo512]

Welcome to the post-COVID world!

Not with any other post Covid vehicle I’ve owned. Maybe I’ve just been lucky up to now

 

[Viper]

3M Crystalline on all the windows, including on the Pano. My son and I repaired the wheels and swapped the silver beadlock bolts over to some black ones. And the truck got it's quarterly wash! More pics and videos coming up this week after the DOMO event.View attachment 33749

you ready to reveal these wheels yet?

 

[Weather Man]

Got home from vacation yesterday and parked left the RHO outside the garage since I was gonna give her a wash in the morning. Move the truck over by my shed to wash in morning. Get out and walk to hose and look back at truck just in time to see a doggone mouse drop out of the engine bay area. That mouse had already chewed on a paper towel roll in the bed that hadn't been during the trip!

Parked the truck inside later on and set a fresh trap in case another mouse drops out. There is a nest somewhere, just hoping the mouse was too busy chewing on paper towels to chew on wiring. Checked the engine bay but couldn't see anything.

 

[Booky]

Did the first oil change and tire rotation on my RHO. I always take quick videos when I change oil on my vehicles for documentation purposes.

 

[ZEUS MUSCLE]

What did I do to my RHO? I lost one set of keys!

Started the truck up, threw the kids in, and went to an arcade. When I got there I couldn’t find my keys. Tried turning the truck on and of course it wouldn’t turn on.

I’m thinking I put the keys on the tailgate cover and drove off or something stupid. I drove my old steps. Checked the house. Nowhere. Wife came and gave me my spare.

I lost them. I’m so dumb

 

[INTIMD8R]

PPF'd the black pieces on the front of the rear fenders