What did you do to your RHO Today?

[TXRHO]

I think Iv read you can order them paint matched directly from the dealer, any idea if that's the case?

I'm a parts manager at a CDJR dealer. The mirror covers are only available to order in the OEM black, chrome, or black plastic for a 2025 1500.

 

[Hurtadojaimee]

Vinyl wrap my friend in my garage ha. I think the roll cost $42.

Nice! Iv wrapped a few cars in my time I was wondering what film matched the best what did you use? I actually want to maybe wrap the front grille surround but didn't want to commit to getting it painted incase I didn't like it similar to this Trx

 

[Hurtadojaimee]

I'm a parts manager at a CDJR dealer. The mirror covers are only available to order in the OEM black, chrome, or black plastic for a 2025 1500.

Oh good to know! I feel a little better about my RHO purchase knowing you work for them and chose to buy one as well

 

[Irongoats]

Nice! Iv wrapped a few cars in my time I was wondering what film matched the best what did you use? I actually want to maybe wrap the front grille surround but didn't want to commit to getting it painted incase I didn't like it similar to this Trx

I use Avery Dennison mostly did my daily driver and it works great. Got it from Metro Restyling.

 

[RamFan]

I'm a parts manager at a CDJR dealer. The mirror covers are only available to order in the OEM black, chrome, or black plastic for a 2025 1500.

For the tow mirrors, same options? I think I’d like chrome or gloss black. Maybe.

Chris

 

[Dan G]

Passenger princess doesn’t sound too bad anymore. Cooled Massage lazy boy seat and some game play

 

[RamFan]

Passenger princess doesn’t sound too bad anymore. Cooled Massage lazy boy seat and some game play

Tell us how you did it

 

[RamFan]

Washing the truck for this tomorrow......

Katy Texas Event

RHO’s are invited too. Anyone going?

www.ram-rho.com

Chris

 

[MattH89]

I bought this Ranch Road organizer bin for the bed. It's got nice grippy feet so it doesn't slide but is easy enough still to push further in or pull onto the tailgate for loading. I like the custom divider slots.

 

[Dan G]

Tell us how you did it

Just plugged in the PS5 into the rear passenger outlet and HDMI into the passenger screen slot. Nothing special, it worked right away.

 

[RamFan]

Just plugged in the PS5 into the rear passenger outlet and HDMI into the passenger screen slot. Nothing special, it worked right away.

Well, that was easy...

 

[RDRHINO]

Passenger princess doesn’t sound too bad anymore. Cooled Massage lazy boy seat and some game play

I need to show my son this since he'll be the PP next Friday evening on a 5-hr drive to Houston. But he won't be playing GTA...

 

[RDRHINO]

I bought this Ranch Road organizer bin for the bed. It's got nice grippy feet so it doesn't slide but is easy enough still to push further in or pull onto the tailgate for loading. I like the custom divider slots.View attachment 11661View attachment 11663

Where did you buy it from? I like that idea! Would be really easy to secure to the bed utility cleats too for additional stability. THEN I can have the baddest ass grocery getter in town!

 

[MattH89]

Where did you buy it from? I like that idea! Would be really easy to secure to the bed utility cleats too for additional stability. THEN I can have the baddest ass grocery getter in town!

I bought it directly from Ranch Road Cargo's website. It didn't even occur to me to check one of our vendors first, but I should've.

 

[FrankNSteinPC]

You do know once installed you need to retorque all the bolts every 400-500 miles
Right? And if a cop wanted to be a dick they could tow you for them,they are not street legal

I have a co-worker who was a big Jeep guy and was part of a large Jeep club here in Texas. He told me there are some states where bead locks may be frowned upon and told me to check before I drive into those states. Considering my main travel paths are TX, NM, CO, and OK, I think I am good. I only go through the northern part of NM to get to Durango and Silverton in Colorado. I think I am good there for sure, even though CO is getting more stupid by the year as the Cali transplants keep infesting the state. I am more concerned with my CCL and magazine sizes than with my rims traveling through NM and CO. I have family and grew up in Oklahoma, that's not a concern either.

90% of the officers could care less, and even more don't know what is or isn't DOT approved. Living in a free state (Texas), where 4X4s and off-road modifications are more common than stock vehicles, I'm not too concerned with running into any officer with an attitude over bead locks here or across any travel path I take. I appreciate the advice and concern, but I'm fairly confident this is a moot subject where I travel.

Yes, I know I will need to check them, especially after the first 400-500 miles. Mostly, though, giving them a good torque check once a month is sufficient.

 

[Nate 9AND3]

Ram RHO on 9AND3 Forged Wheels. FR-01R finished in Matte Brushed Dark Bronze. 18x9 0mm offset.

 

[505~RHO]

Iv installed RB30 running boards, LED lights for the Level 0 3rd brake light, matte screen protector, and bedside decals so far.
View attachment 11629View attachment 11630

How happy are with the RB 30’s? I’m torn between them and RB 20’s. 20’s look more eye appealing but the 30’s seem more practical IMO being they stay the same width along the cab then taper towards the rear.

 

[Condren25]

Paint correction, ceramic coated, tinted.

What percentage are these tints?

 

[Condren25]

Just broke the 500 mile mark today, installed the JB4, radar detector with blend mount and rough country hard roll up bed cover. Next we - paint correction, ceramic and tint.

You find a good diagram on where to tap into for blend mount? I will be doing this soon just need to know where to tap. I’ve already got the blend mount from my last vehicle.

 

[TXRHO]

You find a good diagram on where to tap into for blend mount? I will be doing this soon just need to know where to tap. I’ve already got the blend mount from my last vehicle.

This is a little pricey, but it was worth it not to have to do any wiring.

19-25 Ram Radar Detector Harness

This harness is for installing your radar detector into your 2019-2025 Ram. This harness saves you from splicing and/or entering pins into your trucks wiring harness. This plug and play harness connects inline at the rear view mirror and allows you to connect your radar detector to either your...

www.gen5diy.com