What did you do to your RHO Today?

[RDRHINO]

I'm back after my @rhinonow imposed sabbatical the other day . Well played!
Today, I picked up my truck and drove it 500 glorious miles home! Holy shit my face hurts from smiles to the mile the entire way and that was just the break-in. These things are so cool. View attachment 11396

Glad to see you finally got her home! LOVE the Hydro Blue! If I was gonna have to order one, that's what I was going with. I was dead set on it until I saw the red in person. Second favorite color option though! Glad you're enjoying it!

 

[ah64aviator]

Glad to see you finally got her home! LOVE the Hydro Blue! If I was gonna have to order one, that's what I was going with. I was dead set on it until I saw the red in person. Second favorite color option though! Glad you're enjoying it!

Thank you. I saw a red one there waiting to be picked up yesterday parked next to mine. It was sharp! Red was my second choice. I was nervous about hydro blue because I had never seen it in person before, but I'll say this, it looks way different in person than in any pictures I've seen. It's so vibrant.
Time to go out and install my goodies!

 

[RHO89]

Good ol'e 37s on a stock RHO.
Eibachs on order but no rub as is.
37x12.5r20 Toyo Open Country RT Trails
20x9 Black Rhino Kelso +12

 

[Irongoats]

Back to the shop to install the front leveling springs...this time the correct side

 

[TheBarBack]

Installed MRT extreme... loud now

 

[FrankNSteinPC]

Ordered four of these so my bead-lock-capable rims become actual bead-lock rims.To those who also own a Black RHO - don't let the OCD take you over. Just leave the splatter on it. Being the rainy part of the year, I have gone without a car wash for a week now. The black does show every splatter. The first week I was obsessed with it and then N. Texas is doing its thing. I'll wait a bit to wash it again....

I received my bead lock rings today
The box was beat up pretty bad, but each ring was in its own well packed box.

Queue the Pointer Sisters! I’m soooo excited!
I can’t wait to get them put on.

 

[D&Sadventure]

That’s what I was expecting. The deep relief on the back side. Has to be there for the tire to have a place to fit.

 

[ASiskos]

View attachment 10667Shifts and Grins Diode Dynamics back up lights. I have them set up to turn on in reverse and also via a aux switch. They also have the red running lights. View attachment 10668

@mike12193 nice set-up. Curious on how these mount,any other pics?

 

[ah64aviator]

I received my bead lock rings today
The box was beat up pretty bad, but each ring was in its own well packed box.

Queue the Pointer Sisters! I’m soooo excited!
I can’t wait to get them put on.

 

[Dan G]

Dealer order and installed my Rambar when truck came in. I noticed towards the back on both sides the plastic of bed is bent down and it looks like they put a spacer between the bed and Rambar but it’s welded on as part of the Rambar, doesn’t look like anything dealer did. Just sits funny.

Anyone have photos or know if this is normal?

 

[BilletRHO]

Dealer order and installed my Rambar when truck came in. I noticed towards the back on both sides the plastic of bed is bent down and it looks like they put a spacer between the bed and Rambar but it’s welded on as part of the Rambar, doesn’t look like anything dealer did. Just sits funny.

Anyone have photos or know if this is normal?

Were they supposed to drill a relief hole there? There are videos on youtube of the install process and they are drilling 3 holes on each side and somewhat counterboring the plastic.

 

[RDRHINO]

Were they supposed to drill a relief hole there? There are videos on youtube of the install process and they are drilling 3 holes on each side and somewhat counterboring the plastic.

Seems that would make the most sense.....but sometimes techs aren't the sharpest tacks

 

[TXRHO]

Dealer order and installed my Rambar when truck came in. I noticed towards the back on both sides the plastic of bed is bent down and it looks like they put a spacer between the bed and Rambar but it’s welded on as part of the Rambar, doesn’t look like anything dealer did. Just sits funny.

Anyone have photos or know if this is normal?

Here are the Ram Bar installation instructions. Looks like they were supposed to drill holes for that. See pages 6-7

 

[frogjbm]

Here are the Ram Bar installation instructions. Looks like they were supposed to drill holes for that. See pages 6-7

So they did drill, but used the wrong diameter bit so it would sit flush, is that what we're seeing? Unreal man.

 

[ah64aviator]

Installed my Revolver X4s tonneau, black lugs, bed rug, and radar detector mirror mount.

 

[ah64aviator]

I'm on a roll today! "Amazon-special" mud flaps to finish off the day. It's beer-thirty now.

 

[truckguy]

I'm on a roll today! "Amazon-special" mud flaps to finish off the day. It's beer-thirty now.

What’s you initial impression of the revolver cover?

 

[ah64aviator]

What’s you initial impression of the revolver cover?

Love it! It's the lowest profile cover I've ever seen in person and I really wanted that aspect. I'm pleasantly surprised by how sturdy it is actually. I expected something more flimsy but it's not. I think I'm going to add the BAK Box to go with it/under it for storage. It'll take up the same space as a roll-up canister but I'm using that space for storage of my stuff instead, so not wasted. I highly recommend the cover.

 

[Scottie2Hottie]

I'm on a roll today! "Amazon-special" mud flaps to finish off the day. It's beer-thirty now.

Link to flaps? Did you have to drill new alignment holes?

 

[mike12193]

@mike12193 nice set-up. Curious on how these mount,any other pics?

I purchased the kit that included the harness fromShifts and Grins. It came with a switch but decided to hook it up to the aux switches. S&G provided the instructions and I added diodes. The mounts are great, powder coated and go between the rear row hooks and frame The hooks protect the lights. I will get some more pics when I get back from my work trip.