What did you do to your RHO Today?

Ok then that rules out a loose wire tap. Now the next question is did you confirm the pin-out of the trailer harness to your lights? Like, can you confirm voltage on the harness plug (where it joins to your new lights) when the truck is in reverse?
@Eighty it's definitely my truck. My buddy has a 25 Rebel and bought the same kit as I did for his truck from @Nick797. I used his pods and wiring harness to test and I get no lights. Installed his kit on his truck and he gets both the red running and the white reverse lights.
With everything connected on my truck, I get no power to the center pin of my bumper 7 pin outlet (which explains no white reverse lights on the pods). Additionally, I get no pulsing power to either turn signal pin on the bumper with the hazards on. (the Rebel does).
The lights all work on my dual waverunner trailer (it has no reverse lights however).
With the diode dynamics kit plugged in, my truck says there is a trailer connected so maybe that is the problem or contributing. I don't know, but unless someone has something I'm missing, these might have to go back. Happy no red and white lights so I'm blue day 😂
 
@SAMO
1200-1500.00 is typically what I’ve spent on my previous vehicles. I had mine done for 1,000 for this truck. He did my father in laws dually and brother in laws, so we got a little deal. He used the System X Max Ceramic and did all my glass too!
 
Last edited:
@Eighty it's definitely my truck. My buddy has a 25 Rebel and bought the same kit as I did for his truck from @Nick797. I used his pods and wiring harness to test and I get no lights. Installed his kit on his truck and he gets both the red running and the white reverse lights.
With everything connected on my truck, I get no power to the center pin of my bumper 7 pin outlet (which explains no white reverse lights on the pods). Additionally, I get no pulsing power to either turn signal pin on the bumper with the hazards on. (the Rebel does).
The lights all work on my dual waverunner trailer (it has no reverse lights however).
With the diode dynamics kit plugged in, my truck says there is a trailer connected so maybe that is the problem or contributing. I don't know, but unless someone has something I'm missing, these might have to go back. Happy no red and white lights so I'm blue day 😂
I had this exact same issue with my truck with the same kit. My tech has traced it down to the trailer brake & towing control module part # 68602159AE. I ordered a replacement (was backordered) and it just came in last week. I'm just waiting for the tech to find time to replace it. Like yours, my trailer lights work fine (after removing extra lights I had installed that the truck didn't like). I am having my tech install the module to see if it fixes the issue. If it does, I will write up an RO for "trailer lights inop" and have this covered under warranty. If it doesn't fix the issue, then its back to the diagnostic tests.....
 
Finally added the amazon mudflaps i bought back in February lol
 
had to do this finally.. Level 0 owners problems :D

IMG_4824.webp


IMG_4826.webp
 
Another cosmethic upgrade. Wanted to get rid of the silver lugnuts but figured why don't I just print black caps instead of replacing them with lugnuts that will probably rust anyway. Designed one spiky and one regular looking, not sure which I like better. Now it's time to test if they stay on :D


IMG_4881-(1).webp
IMG_4886.webp
IMG_4887.webp
IMG_4893.webp
IMG_4892.webp
 

Attachments

  • IMG_4892.webp
    IMG_4892.webp
    292.5 KB · Views: 9
Gave my RHO a 2 hour bath today... Not regretting the black yet, but I feel like im going to. Anyone want to trade that has a white one??? 🤣View attachment 10022
Put chemical guys ceramic hydro slick on it don’t use a lot when you apply it 4 drops and then use their synthetic quick detailer between washes it will help not attract dust
 
Another cosmethic upgrade. Wanted to get rid of the silver lugnuts but figured why don't I just print black caps instead of replacing them with lugnuts that will probably rust anyway. Designed one spiky and one regular looking, not sure which I like better. Now it's time to test if they stay on :D


View attachment 14645 View attachment 14646View attachment 14647View attachment 14648View attachment 14650
I sure hope those are a tight fit. They're going to be spinning at about 700 rpm!
 
I sure hope those are a tight fit. They're going to be spinning at about 700 rpm!
bit more than that but I don't think they are going anywhere :)) just want to see how they handle heat, dust, dirt etc
 
IMO the spikes look a little ghetto :) Like you’re trying to replicate semis. But love the ingenuity!! :)

I’d just go regular black covers.

Chris
 
Last edited:
Back
Top