Exhaust With High Flow PSP Downpipes

That was just one example of a manufacturer. There are several sellers selling Z Pipes. As cheap as $250 to $300.

And almost always they will let you purchase only 1 unit. They aren't going to force you to buy 2. They know many people are just buying for themselves.

I have purchased using Alibaba about 4 times over the past few years. The sellers are very logical and will answer all your questions and concerns.

The biggest drawback - The wait time. Usually 3 weeks (best case scenario) to 2 months.
Yeah, familiar with them. I’ve bought all kinds of stuff, including Surron motorcycles through them.
 
I'm interested. I have a G20 and really don't mind the sound it has with just a catless downpipe and the stock exhaust. It'll ultimately be putting that on the RHO as well. The sound is really amazing from the video, but is it real? I would want to see and hear it for myself. I'll do some digging on the G20/G80 threads.
 
I'm interested. I have a G20 and really don't mind the sound it has with just a catless downpipe and the stock exhaust. It'll ultimately be putting that on the RHO as well. The sound is really amazing from the video, but is it real? I would want to see and hear it for myself. I'll do some digging on the G20/G80 threads.
I did some more digging into this. So I will say that I actually don't see an improvement in sound with the Z pipe on other, less production quality, videos. So I am not sure it sounds better. The H pipe is supposed to add deeper pitch. The Z specifically says it adds higher pitch. Which isn't what I am chasing, but it might be for others.
 
I think we collectively need to give up our dreams of a deep, low tone exhaust.

I think a better goal would be an exhaust that sounds more exotic, more sporty. If a Z pipe can move us in the direction of sounding more like a GT-R, then I'm with that idea.
 
I think we collectively need to give up our dreams of a deep, low tone exhaust.

I think a better goal would be an exhaust that sounds more exotic, more sporty. If a Z pipe can move us in the direction of sounding more like a GT-R, then I'm with that idea.
I'm a firm believer it will never be deep and low like a V8. Personally I think it's impossible. I just can't wait to get my down pipes paired with my 0fg so it can be as loud and obnoxious as possible
 
I think we collectively need to give up our dreams of a deep, low tone exhaust.

I think a better goal would be an exhaust that sounds more exotic, more sporty. If a Z pipe can move us in the direction of sounding more like a GT-R, then I'm with that idea.
Absolutely
 
Maybe do resonators (blue) and Z pipe (red) in this stock pipe.
1786401904497.webp
 
Resonator won’t fit in the blue because that’s under the transmission. That’s where the squished pipe is definitely not enough room.
No, that’s not where the squished pipe is. That section is behind the transfer case. Plenty of room there. The squished pipe goes between the skid plate and transmission pan different piece of pipe. It is a little short it’s only 11.5 inches long and the resonator is 12. But you could probably cut a little bit off of each end of the resonator and make it work.
 
Resonator won’t fit in the blue because that’s under the transmission. That’s where the squished pipe is definitely not enough room.
I’m sure you’ll recognize this picture.
 

Attachments

  • IMG_9426.webp
    IMG_9426.webp
    79 KB · Views: 44
I’m sure you’ll recognize this picture.
Yeah I get what you are saying now, I’m putting resonators in place of the oem flapper vale’s on Wednesday, if the cable really did help with the drone I’ll move them further up stream by the h pipe since they will fit there better than the resonators.
 
I was just thinking it would be easy to remove that one section of stock pipe. Tack weld several bars across it to hold everything in place. Cut the sections out one at a time and weld the resonators and Z pipe in. Then just bolted back in. Removing it would give you plenty of room to weld all the way around the pipe neatly.
 
Got rid of the valves and added these stainless bros resonators, quiet enough where drone on the freeways isn’t bad at all. Tone is deeper now which is nice. Happy with this current set up. Only thing I would change is possibly adding cut out later for when I want it loud.
 

Attachments

  • IMG_2331.webp
    IMG_2331.webp
    201.1 KB · Views: 48
  • IMG_2332.webp
    IMG_2332.webp
    210.2 KB · Views: 52
Got rid of the valves and added these stainless bros resonators, quiet enough where drone on the freeways isn’t bad at all. Tone is deeper now which is nice. Happy with this current set up. Only thing I would change is possibly adding cut out later for when I want it loud.
So down pipes with four 12” stainless brothers resonators added to the stock exhaust?
 
Rear main seal leak RAM RHO Canyon Lake Photo Thread What did you do to your RHO Today? RHO Delivered Eibach Pro-Lift Kit Installed I don't want air bags -- how about Timbren?
Rear main seal leak RAM RHO Canyon Lake Photo Thread What did you do to your RHO Today? RHO Delivered

Latest Discussions...

Trending content

Back
Top