RHO Wheel spacers

[yoda33073]

I have always used BORA spacers and have never had a problem. I run 1 3/4 inch spacers with no rubbing. Before the haters comment, I double check the torque with 2 different wrenches and only use BORA as stated before.

Do you literally remove your tires and check the spacers torque often? That sounds like a lot of work?

 

[Faze]

No rubbing at all, it's the lowest spacer you can go before the factory studs hit the back of the wheel and I wouldn't want to cut my factory studs since this is only temporary until I decide to get wheels

damn I was about to get 1 inch as I don't want to get them stick out too much, but don't want to cut the studs either

 

[NEBOYSA]

I had trx headlocks on my ram 1500 bts with bora 1.25 front and 1.5 rear spacers. It's been 3 years ago but I'm certain 1.25 is minimum you can go. I was running different sizes since front sticks out a little more on rams and wanted to even it out.

 

[Mikey Swift]

Alright boys, I pulled the trigger on the 1.5" aFe Spacers ( thx @Nick797 ) and had Discount Tire install for $40. Excellent quality so far, they even said that these look great compared to some of the trash people bring in. I love the look, just enough poke...also installed the Ark minis.
Forgive the filthy truck, just got back from a trip to Colorado.

 

[Wrinkled_Donut]

Alright boys, I pulled the trigger on the 1.5" aFe Spacers ( thx @Nick797 ) and had Discount Tire install for $40. Excellent quality so far, they even said that these look great compared to some of the trash people bring in. I love the look, just enough poke...also installed the Ark minis.
Forgive the filthy truck, just got back from a trip to Colorado.
View attachment 18332View attachment 18333View attachment 18334View attachment 18335View attachment 18336View attachment 18337View attachment 18338View attachment 18339View attachment 18340View attachment 18341View attachment 18342View attachment 18343

Looks awesome, any difference in ride quality?

 

[Jeebuss]

The ark minis look like they give just the right amount of coverage for the poke. Stance looks

 

[Faze]

I had trx headlocks on my ram 1500 bts with bora 1.25 front and 1.5 rear spacers. It's been 3 years ago but I'm certain 1.25 is minimum you can go. I was running different sizes since front sticks out a little more on rams and wanted to even it out.

no issues when running staggered setup?

 

[Mikey Swift]

Looks awesome, any difference in ride quality?

None...feels the same. Although I haven't tested the cornering yet, I imagine it might feel better.

 

[Mikey Swift]

The ark minis look like they give just the right amount of coverage for the poke. Stance looks

I agree, thank you.

 

[Nick797]

Alright boys, I pulled the trigger on the 1.5" aFe Spacers ( thx @Nick797 ) and had Discount Tire install for $40. Excellent quality so far, they even said that these look great compared to some of the trash people bring in. I love the look, just enough poke...also installed the Ark minis.
Forgive the filthy truck, just got back from a trip to Colorado.
View attachment 18332View attachment 18333View attachment 18334View attachment 18335View attachment 18336View attachment 18337View attachment 18338View attachment 18339View attachment 18340View attachment 18341View attachment 18342View attachment 18343

Good stance! And of course I love the ARK Minis!

 

[Jeebuss]

Are the guards called mini's or micro's? Website says micro's. Just making sure there's not another variation of the ark guards.

 

[Adub]

Are the guards called mini's or micro's? Website says micro's. Just making sure there's not another variation of the ark guards.

Micros

 

[SeñorRAM]

Looking for recommendations for another manufacturer that offers 1.5″ wheel spacers comparable to AFE’s. I placed an order with them about two months ago and they keep pushing the production date back. Just got yet another email saying the expected ship date is now mid-to-late December... and I’m done waiting.

What’s the next big option out there? Appreciate any reccomendations or personal experiences.

Really diggin yours @Mikey Swift ! but can't find them in stock anywhere.

 

[Mikey Swift]

Looking for recommendations for another manufacturer that offers 1.5″ wheel spacers comparable to AFE’s. I placed an order with them about two months ago and they keep pushing the production date back. Just got yet another email saying the expected ship date is now mid-to-late December... and I’m done waiting.

What’s the next big option out there? Appreciate any reccomendations or personal experiences.

Really diggin yours @Mikey Swift ! but can't find them in stock anywhere.

The other brand available at 797 should work fine.

Borne Off-Road 6x139.7 Wheel Spacers, Fits Ram 1500, TRX & RHO 2019+ (Multiple Size Options)

Direct fit for 2019+ Ram 1500 One inch spacers will require the studs to be cut down if using with OEM wheels or an aftermarket wheels without a stud pocket. Also fits vehicles with 6x139.7 bolt pattern, M14x1.5 studs, and 77.8 mm center bore Forged 6061-T6 aluminum construction provides the...

797performance.com

 

[Wrinkled_Donut]

The other brand available at 797 should work fine.

Borne Off-Road 6x139.7 Wheel Spacers, Fits Ram 1500, TRX & RHO 2019+ (Multiple Size Options)

Direct fit for 2019+ Ram 1500 One inch spacers will require the studs to be cut down if using with OEM wheels or an aftermarket wheels without a stud pocket. Also fits vehicles with 6x139.7 bolt pattern, M14x1.5 studs, and 77.8 mm center bore Forged 6061-T6 aluminum construction provides the...

797performance.com

Thinking about pulling the trigger on these myself. I know you have the AFE's but are yours still holding up fine? Any issues with ride quality etc?

I just ordered the same Ark Micro splash guards that you have and I think they'll look alot better with spacers on the wheels.

Might go with the 1". Just a bit hesitant as I've always heard these things can be hell on wheel bearings etc.

 

[Adub]

Thinking about pulling the trigger on these myself. I know you have the AFE's but are yours still holding up fine? Any issues with ride quality etc?

I just ordered the same Ark Micro splash guards that you have and I think they'll look alot better with spacers on the wheels.

Might go with the 1". Just a bit hesitant as I've always heard these things can be hell on wheel bearings etc.

Just do it

 

[INTIMD8R]

Thinking about pulling the trigger on these myself. I know you have the AFE's but are yours still holding up fine? Any issues with ride quality etc?

I just ordered the same Ark Micro splash guards that you have and I think they'll look alot better with spacers on the wheels.

Might go with the 1". Just a bit hesitant as I've always heard these things can be hell on wheel bearings etc.

I like the thought of the 1" option

 

[FernNetty]

Thinking about pulling the trigger on these myself. I know you have the AFE's but are yours still holding up fine? Any issues with ride quality etc?

I just ordered the same Ark Micro splash guards that you have and I think they'll look alot better with spacers on the wheels.

Might go with the 1". Just a bit hesitant as I've always heard these things can be hell on wheel bearings etc.

Thinking of going with the AFE’s myself. I just need a push.

 

[Adub]

Thinking of going with the AFE’s myself. I just need a push.

 

[Mikey Swift]

Thinking about pulling the trigger on these myself. I know you have the AFE's but are yours still holding up fine? Any issues with ride quality etc?

I just ordered the same Ark Micro splash guards that you have and I think they'll look alot better with spacers on the wheels.

Might go with the 1". Just a bit hesitant as I've always heard these things can be hell on wheel bearings etc.

No issues, been great. Go 1.5"...the stock studs won't clear the back with just 1".