What did you do to your RHO Today?

mghtymous21 · May 28, 2026

Craigt55 said:
Just had mine installed this afternoon. I’m pretty sure I’m going to have the same problem. Lol. Even talked the wife into going out to dinner tonight, just so i could play with it more.

Have you noticed that your turbos sound louder? I didn't expect to be able to hear them better by doing the exhaust but I noticed it the first time I hit the gas

Craigt55 · May 29, 2026

mghtymous21 said:
Have you noticed that your turbos sound louder? I didn't expect to be able to hear them better by doing the exhaust but I noticed it the first time I hit the gas

I will listen today. I was having to much fun. Lol. Right after i got it, I drove right out into the street and did a launch drive off.

Bennersj · May 29, 2026

MapleRHO said:
After trying 2 other stake pocket covers that weren't flush , behold, the missing piece from the factory (what should have been!). Definitely pricier, but worth the satisfying click!

https://www.amazon.com/dp/B0C6WQD7WZ?tag=ramrho-20

View attachment 31007 View attachment 31009 View attachment 31011

ordered immediately, thank you.

mghtymous21 · May 29, 2026

Bennersj said:
ordered immediately, thank you.

I found a file online, I'm gonna see if I can 3d print a set

Craigt55 · May 29, 2026

mghtymous21 said:
Have you noticed that your turbos sound louder? I didn't expect to be able to hear them better by doing the exhaust but I noticed it the first time I hit the gas

So I did notice some extra spool today when I punched it.

Santino · May 29, 2026

Delivery from 797...Now to pick some tires!

brianwilkey · May 29, 2026

Installed the bed utility rails along with the cross bars.

NWI_Truck · May 29, 2026

Added a Honda 110 to the bed

. Anyone have any recommendations for loading ramps or bed accessories for hauling? Had a PW50 that I could just lift in/out. This one, not so much.

Craigt55 · May 29, 2026

Installed the M&R 23” pro light bar, and there pro ditch lights today. Super bright led, and the amber matchup perfectly.

MapleRHO · May 30, 2026

FitCamX with the polarizer lens. The lens works extremely well and cuts out pretty much all the glare from the dash/glass/hood and anything else. A lot of people are worried about the clarity of the camera, I think it's fine and I'm willing to have the OEM look over the Sony Starvis sensor. Not a crazy difference. The fit and finish are perfect, didn't have to adjust anything. 10 minute install with the removal tool included in the box.

Jayrsingh · May 30, 2026

Dubsesd said:
Installed some smoked xpel ppf on the tailsView attachment 29219

Looks great!! Mind sending a link or letting me know where to buy the smoke ppf and what level tint? Thanks!

Doatsofoats · May 30, 2026

Always wanted a machine finish wheel when I got a black truck so went with the KMC GRS. Also scored some OEM TRX steps for $400 off Facebook marketplace!

Craigt55 · May 30, 2026

Doatsofoats said:
Always wanted a machine finish wheel when I got a black truck so went with the KMC GRS. Also scored some OEM TRX steps for $400 off Facebook marketplace!

Look sweet on that black RHO.

JCarrithers · May 30, 2026

Craigt55 said:
AWE Catback finally showed up this morning. Had it installed this afternoon. So much better in person. The videos don’t do it justice!!

Just installed mine today. Agree, it sounds really good and surprisingly quiet when just cruising.

JCarrithers · May 30, 2026

Craigt55 said:
So I did notice some extra spool today when I punched it.

Noticed the same even during simple things like backing up the driveway.

slimfl08 · May 31, 2026

INTIMD8R said:
Busy day, installed Cat6, changed the oil and filter, detailed under the hood, PPF'd the rocker panels and plugged the front license plate holes

What did you use to plug the license plate holes?

brianwilkey · May 31, 2026

slimfl08 said:
What did you use to plug the license plate holes?

These are what I used for mine: https://www.amazon.com/dp/B0F6CTKB1Z?tag=ramrho-20

I also used them to plug the holes in the bed after I removed the bed-mount spare tire carrier.

slimfl08 · May 31, 2026

brianwilkey said:
Installed the bed utility rails along with the cross bars.

Ive been looking to see what other folks were doing. I had a pair of Ride88s in my other truck. I may still go with those just need to buy the adapter for the bed.

Space Truckin · May 31, 2026

brianwilkey said:
These are what I used for mine: https://www.amazon.com/dp/B0F6CTKB1Z?tag=ramrho-20

I also used them to plug the holes in the bed after I removed the bed-mount spare tire carrier.

Save a few $

125PCS Rubber Plugs for Round Holes, Premium Black Rubber Hole Plugs, Various Sizes of Round Hole Silicone Tool, Plugs for Holes Assorted Sizes Suitable for Car Wiring Furniture: Amazon.com: Industrial & Scientific

125PCS Rubber Plugs for Round Holes, Premium Black Rubber Hole Plugs, Various Sizes of Round Hole Silicone Tool, Plugs for Holes Assorted Sizes Suitable for Car Wiring Furniture: Amazon.com: Industrial & Scientific

www.amazon.com

brianwilkey · May 31, 2026

slimfl08 said:
Ive been looking to see what other folks were doing. I had a pair of Ride88s in my other truck. I may still go with those just need to buy the adapter for the bed.

Those are definitely a nice setup. Mine is very nearly impractical due to the height. But I often need to use my bed in conjunction with a hitch/trailer, so the roof rack style is the best approach for me.