Ram RHO Aftermarket Wheel Specs and Tire Pictures [Size/Offset]

[D&Sadventure]

View attachment 5089View attachment 5092Absolutely no rubbing now and still has a very aggressive stance.

I am considering the same weld ledge 6 wheel in satin gunmetal 18 x 9 / 0 Worried about excessive stick out. Don’t want to ruin the look of the truck, but your pictures look okay. I may go that route way. Unless you still have the stock take offs available.

 

[IdealRace]

maybe not the best picture - but I had it here already. They don't stick out past the fender flares.

 

[Wesharris07]

Vossen HF6-4

These are sweet what size are they?

 

[530rho]

These are sweet what size are they?

18x9 ET0

 

[mike12193]

I am considering the same weld ledge 6 wheel in satin gunmetal 18 x 9 / 0 Worried about excessive stick out. Don’t want to ruin the look of the truck, but your pictures look okay. I may go that route way. Unless you still have the stock take offs available.

I would estimate they stick
Out about 3/4 inch more then the stock wheels. I think it is the best option.

 

[D&Sadventure]

I would estimate they stick
Out about 3/4 inch more then the stock wheels. I think it is the best option.

Yes, definitely agreed as far as the math goes I just know manufacturer specs aren’t always exactly what they claim to be?

 

[Wesharris07]

18x9 ET0

lol man I just realized who you were. I always comment on your YouTube shorts.

 

[D&Sadventure]

Mike12193 could you please share more pictures of what I’m assuming is Weld ledge6’s 18x9 +0 . Some pictures of the wheels showing the offset from bead ring to spokes. Thanks

 

[dwinters7613]

Anyone here know what the offset is of the stock black wheels? I'm getting my RHO this weekend and I'm curious. Thanks

 

[D&Sadventure]

Anyone here know what the offset is of the stock black wheels? I'm getting my RHO this weekend and I'm curious. Thanks

Should be +19.04

 

[dwinters7613]

Should be +19.04

Thanks for the quick reply

 

[Mbassquez]

Volk TE37 Large PCD 18x9 +0 in Diamond Dark Gunmetal
19lbs

Got them from Showstoppers in Chamblee, GA
Mounted expertly @ Discount Tire in Lawrenceville, GA (Chris)
(OEM non beadlock are 31lbs)
No rubbing - they fit like money.
View attachment 7305View attachment 7306
View attachment 7307

can you post more pics of these wheels tire setup outside
looking at 57drx wheels

 

[NeuteredTRX]

Seeking some clarity, I’ve seen people post pics of them having the 1.6” eibach pro lift on the front and running 37x13.50 tires with 20x10 -18 offset rims and state no rub at full lock. However, I was looking at some fuel rims and was told by fuel support (email response below) I would have rub if I went that route. Is anyone else running this set up and does it rub at full lock?

 

[StealthRHO]

Seeking some clarity, I’ve seen people post pics of them having the 1.6” eibach pro lift on the front and running 37x13.50 tires with 20x10 -18 offset rims and state no rub at full lock. However, I was looking at some fuel rims and was told by fuel support (email response below) I would have rub if I went that route. Is anyone else running this set up and does it rub at full lock?

Bump

 

[Santino]

KG1 Forged 20x9 0 offset...Falken at4 35 x 12.5

 

[StealthRHO]

Seeking some clarity, I’ve seen people post pics of them having the 1.6” eibach pro lift on the front and running 37x13.50 tires with 20x10 -18 offset rims and state no rub at full lock. However, I was looking at some fuel rims and was told by fuel support (email response below) I would have rub if I went that route. Is anyone else running this set up and does it rub at full lock?

Also looking at Vossen HFX-1 on 37s. Not sure if 1.6" lift would get rid of potential rubbing.
Not jumping the truck, but also not a daily princess.

 

[Dbiznez1]

Is their a 20x10 with 0 offset? I am like 90% about going 20 with 37s

 

[NeuteredTRX]

Also looking at Vossen HFX-1 on 37s. Not sure if 1.6" lift would get rid of potential rubbing.
Not jumping the truck, but also not a daily princess.

Yea I’ve changed my mind and want the HFX-1 20’s but now can’t decide on 37s or 35s

 

[Sreinhardt9]

Good Morning Everyone, figured this would be a much needed thread to start on here like it has been done on the Ram TRX Forum.

Feel free to share your aftermarket wheel / tire specs below.

Wheel Style / Size:
Wheel Offset / Backspacing:
Tire Size:
Rubbing or fitment modifications:


Below is our current list of wheel offerings and fitments, 18" or larger will work. 17" and smaller will not directly fit, modifications will be needed.

• https://justboltons.com/shop-trucks/ram-rho/2025/wheels-street-off-road/

Notes: RHO comes factory with positive / tucked-in offset. Close to or ET00 offset gives it a great stance. Negative offsets you will start to poke outside the fender.

So in theory could get same rim size as oem but et00 offset and would sit flush with the fenders? I like the 18s and would like to reuse the own tires if possible as they are brand new lol

 

[Sreinhardt9]

Vossen HF6-4

What’s the specs on the wheels? And looks like you reused one tires is that right? I’m looking to do the same thing just to get the wheels sitting wider